NAD C 368 Integrated Amplifier 80Wx2 - Black

USD $0.00 USD $0.00 You Save USD $0.00 (%)
SKU#: NAD-88608
Qty In Stock
Sold Only In Canada
NAD C 368 Integrated Amplifier 80Wx2 - Black

With the C 368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. With the optional BluOS® module, the C 368 can connect to your network and be controlled through a smartphone, tablet, or desktop, and connect wirelessly to any other BluOS Enabled device to create a multi-room High Resolution Audio system. You can also instantly connect to the C 368 through Bluetooth, giving you the ability to stream wirelessly from any Bluetooth Enabled device, and if you’re a vinyl fan, you can also add a turntable. Enjoying music has never been so easy. A totally modern approach to amplification, the C 368 is the ultimate amp for any music lover’s system.

Unit of Measure: Each

Key Features
• 80W x 2 Continuous power into 8 or 4 Ohms
• Bluetooth A2DP with aptX supported
• MM Phono input
• Analogue line inputs
• SPDIF coax and optical inputs
• Speaker A, Speaker B
• Stereo or Bridge mode configuration
• Preamp/Subwoofer out
• Headphone amplifier
• MDC Slots for future upgrades
• IR Remote
• Smartphone Control App
• 12V Trigger in/out
• IR in/out
• RS-232 Serial port for control
• Control4, Crestron, RTI, URC, AMX, Savant, Elan certified

Line Input, Pre Out
• THD (20Hz-20kHz) <0.005% at 2V out
• Signal/Noise Ratio >106dB (IHF; A-weighted, ref. 500mV out, unity gain)
• Channel Separation >80dB (1kHz); >70dB (10kHz)
• Input Impedance (R and C) 22 kilohm + 100pF
• Maximum Input Signal >4.5Vrms (ref. 0.1% THD)
• Output Impedance Source Z + 240 Ohm
• Input Sensitivity 93mV (ref. 500mV out, Volume maximum)
• Frequency Response ±0.03dB (20Hz-20kHz)
• Maximum voltage output – IHF load >4.5V (ref. 0.1% THD)
• Tone Controls Treble: ±7.0dB at 20kHz, Bass: ±7.0dB at 60Hz, Balance: -10dB

Phono Input, Pre Out
• THD (20Hz-20kHz) <0.01% at 2V out
• Signal to Noise Ratio >84dB (200 Ohm source; A-weighted, ref. 500mV out), >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)
• Input Sensitivity 1.44mV (ref. 500mV out, Volume maximum)
• Frequency Response ±0.3dB (20Hz-20kHz)
• Maximum Input Signal at 1kHz >80mVrms (ref. 0.1% THD)

Line Input, Headphone Out
• THD (20Hz-20kHz) <0.005% at 1V out
• Signal/Noise Ratio >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)
• Frequency Response ±0.3dB (20Hz-20kHz)
• Channel Separation >60dB at 1kHz
• Output Impedance 6 Ohms
• Continuous Output Power into 4 Ohms and 8 Ohms (Stereo) >80W (ref. 20-20kHz at rated THD, both channels driven)
• Continuous Output Power into 8 Ohms (Bridge Mode). 300W (at 20-20kHz at THD 0.03%)
• THD (20Hz-20kHz) <0.03% (250mW to 80W, 8 Ohms and 4 Ohms)
• Signal to Noise Ratio >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)
• Clipping Power >95W (at 1kHz 0.1% THD)
• Clipping Power (Bridge Mode) >315W (at 1kHz 0.1% THD)
• IHF Dynamic Power 8 Ohms 120W 4 Ohms 200W 2 Ohms 250W
• IHF Dynamic Power (Bridge Mode) 8 Ohms 500W 4 Ohms 560W
• Peak Output Current >20A (in 1 Ohm, 1ms)
• Damping Factor >300 (ref. 8 Ohms, 20Hz and 6.5kHz)
• Frequency Response ±0.3dB (20Hz-20kHz)
• Channel Separation >75dB (1kHz) >70dB (10kHz)
• Input Sensitivity (for 80W in 8 Ohms) Line In: 470mV; Digital In: 21% FS
• Sample Rate up to 24 bit/192kHz
• Frequency Band 2.402G-2.480G
• Maximum Transmit Power (dBm) 7dBm ±2dBm

Power Consumption
• at Auto Standby ON and Network Standby OFF 0.5 Watts*
• at Auto Standby ON and Network Standby ON 1.2 Watts**
• OFF mode (Power switched OFF) 0.1 Watts

Weight & Dimensions
• Gross Dimensions (W x H x D)* 435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)”
• Net Weight 7.8kg (17.2lb)
• Shipping Weight 10.1kg (22.3lb)

Full Manufacturer Warranty
Bookmark and Share